CX11L telemetry crystal 16 mhz to 250 mhz telemetry, ultra low profile , ultra-miniature surface mount quartz crystal description when miniaturization is paramount, statek s low profile CX11L at quartz crystal is an excellent choice. available in frequencies from 16 mhz to 250 mhz, this crystal has a typical footprint of 3.2 mm x 1.5 mm, and a typical height of 0.5 mm. the resonator is manufactured using statek s photolithographic and chemical milling process- es and then sealed within a ceramic package for high stability and low aging. available with tight calibration tol- erances and high stability over temperature, this crystal is well suited for applications that have a space restraint and require a crystal with a low profile. features ultra-miniature, surface mount design ultra-low profile hermetically sealed ceramic package high shock and vibration survival excellent aging characteristics full military testing available designed and manufactured in the usa applications medical medical telemetry pacemakers defibrillators neurostimulators infusion pumps cochlear implants statek corporation 512 n. main st., orange, ca 92868 714-639-7810 fax: 714-997-1256 www.statek.com suggested land pattern 10188 rev c thickness (dim c) lid termination typical maximum inches mm inches mm sm1 0.020 0.51 0.023 0.59 sm2/sm4 0.021 0.53 0.024 0.61 sm3/sm5 0.022 0.56 0.025 0.64 typical maximum dim inches mm inches mm a0.1273.200.1353.43 b0.0601.500.0681.73 c-- see below d0.0280.710.0370.94 package dimensions ceramic 0.071 0.099 (2.51) 0.039 (0.99) inches (mm) 0.059 ceramic lid
how to order low profile CX11L at crystals terminations designation termination sm1 gold plated (lead free) sm2 solder plated sm3 solder dipped sm4 solder plated (lead free) sm5 solder dipped (lead free) specifications specifications are typical at 25 o c unless otherwise noted. spe- cifications are subject to change without notice. fundamental frequency 16 mhz 24 mhz 26.5 mhz motional resistance r 1 ( )90 30 30 motional capacitance c 1 (ff) 1.5 1.4 1.6 quality factor q (k) 70 150 120 shunt capacitance c 0 (pf) 0.7 0.7 0.7 calibration tolerance 1 ?00 ppm, or tighter as required load capacitance 10 pf (unless specified otherwise) drive level 200 w max frequency-temperature ?0 ppm to ?0 ppm (commercial) stability 1,2 ?00 ppm to ?0 ppm (industrial) ?00 ppm to ?0 ppm (military) aging, first year 3 ppm max (better than 1 ppm available) shock, survival 5,000 g, 0.3 ms, 1/2 sine vibration, survival 3 20 g, 10-2,000 hz swept sine operating temp. range -10 o c to +70 o c (commercial) -40 o c to +85 o c (industrial) -55 o c to +125 o c (military) storage temp. range -55 o c to +125 o c max process temperature 260 o c for 20 sec. 1. other tolerances available. contact factory. 2. does not include calibration tolerance. the characteristics of the frequency stability over temperature follow that of the at thickness-shear mode. 3. per mil-std-202g, method 204d, condition d. random vibration testing also available. frequency m = mhz c = ceramic lid sm1 = gold plated (lead free) sm2 = solder plated sm3 = solder dipped sm4 = solder plated (lead free) sm5 = solder dipped (lead free) temp. range: c=-10 o c to +70 o c i =-40 o c to +85 o c s=customer specified frequency stability over temp.range (in ppm) calibration tolerance @ 25 0 c (in ppm) statek corporation 512 n. main st., orange, ca 92868 714-639-7810 fax: 714-997-1256 www.statek.com packaging options ?tray pack ?12 mm tape, 7?r 13?reels per eia 481 (see tape and reel data sheet 10109) cx11 l s c sm1 24.0m , 30 / 10 / / i ,3 pf blank = standard s = special or custom 10188 rev c equivalent circuit l = low profile load capacitance (customer specified)
|
